PRESSURE PIPE
Concrete Pressure Pipes for Drinking Water – A 15-Year Success for Decast, Canada

Today, Decast Ltd., in Utopia, Canada, is one of the leading companies on the national infrastructure market. One of Decast’s many successful products is the concrete pressure pipe. The manufacture of this innovative drinking water pipe differs from a conventional concrete pipe in terms of both structure and function. It was planned and implemented back in 2003, and in February 2004 the first pressure pipes were delivered to a local construction company. CPI 5-2019

> read article

Perfect Forming Technology
DN 1500 concrete pipe with seamless corrosion protection without welding at the construction site – also suitable for pipes with accessible nominal widths

“Going off the beaten track” – this statement, more or less, sums up the systems developer Schlüsselbauer Technology’s trade fair exhibition. At bauma 2019, Schlüsselbauer focused on displaying precast end products that concrete part manufacturers can use to strengthen their position in the market and increase the added- value associated with production. CPI 3-2019

> read article

Perfect Forming Technology
15 Years of Monolithic Manholes – a Success Story of High-Quality Precast Concrete Products for Rainwater and Waste Water Sewage Systems

Obvious weaknesses in sewage systems in general, irrespective of the materials they use, as well as increasing quality expectations in terms of precast concrete products in particular, marked the start of a new era of technology 15 years ago. CPI 2-2019

> read article

Perfect Forming Technology
American Concrete Products launches concrete-HDPE-compound pipe

The preparation for a successful launch of a new infrastructure product into the US civil engineering industry has been completed. One year after the installation of a pilot wastewater pipeline in Pima County, Arizona – a real “practice-test” from installation to ongoing survey – the concrete-HDPE-compound Perfect Pipe was successfully tested again and was granted approval as a standard material for sewerage systems in the county. CPI 1-2019 

> read article

Perfect Forming Technology
Custom-Made Monolithic Manhole Bases – From Planning to Delivery in Just a Few Steps Thanks to a Highly Efficient Procedure

Leko Precast, founded in 1975, has a well-deserved reputation in Western Canada for high-quality precast concrete products. In addition to a wide range of manhole components, it produces box culverts, retaining wall systems and electrical bases. CPI 5-2018

> read article

Perfect Forming Technology
Highly Efficient System for Manufacturing Customized Monolithic Manhole Bases Put into Operation in Ashland, Virginia

On the East Coast of the United States, the manufacturerConcrete Pipe & Precast LLC (CP&P), is almost synonymousfor high-quality pre-cast concrete products. Behind this positive image you’d find a clearly defined strategy and a highly effective team charged with its implementation,which was once again demonstrated in 2017 with the start-up of a largely automated production facility for individually moulded, monolithic concrete manhole bases. CPI 4-2018

> read article

Perfect Forming Technology
Long-Term Stability in Wastewater Infrastructure Thanks to Precast Concrete Parts

In recent decades, few market segments involving the manufacture of precast concrete parts have been so heavily influenced by competing materials than the concrete pipe sector. Classic concrete and reinforced concrete pipes, as well as concrete shafts, are increasingly being forced out, primarily due to an influx of new materials in this traditionally concrete-dominated market. CPI 3-2018

> read article

Perfect Forming Technology
Market Success Drives Capacity Expansion and Automation

It was just three years ago that the owners of pipe manufacturer Bilcon Industries, based in Singapore, made a decision to introduce new pipe technology. CPI 2-2018

> read article

Perfect Forming Technology
Beton Kemmler Supplies Monolithic Manhole Bases for Daimler Testing Ground

A 55-kilometer test track for self-driving cars will soon be completed in Baden-Württemberg, Germany. Not far from Mercedes-Benz’s site in Sindelfingen, south of Stuttgart, Daimler has invested approximately € 200 million in the testing ground for this promising technology since 2015 While only a small amount of this is going towards the underground infrastructure, high quality standards, nevertheless, have been put in place for the selection of building materials. CPI 5-2017

> read article

Perfect Forming Technology
Boisclair et Fils in Canada are Pleased to Report Growing Demand in their Monolithic Concrete Manhole Bases

Boisclair et Fils is specialized in the production of pre-cast concrete elements for infrastructural projects both for the water and wastewater sector and the electricity and telecommunications branches. With a history stretching back over 60 years, the company has built up an excellent reputation and today produces a wide product range designed to serve these industries at two locations in the Province of Quebec. CPI 4-2017

> read article

Perfect Forming Technology
Con Cast Pipe in Canada Responds to Increasing Quality Awareness with Concrete Pipe Featuring HDPE Liners

Thanks to its extremely high quality standards, reliability, and fast order handling, Con Cast Pipe in Canada is undergoing rapid expansion. The company, based in the Toronto metropolitan area, is an incredibly successful one-stop supplier of wastewater systems throughout the entire province of Ontario. CPI 3-2017

> read article

MAGIC 1501
Shortest possible cycle time is the reason to opt for investment in a new manhole ring manufacturing plant in Austria

In a globalised industry, long-term investment decisions are reached after considering a number of different criteria. Protectionism or limiting the selection of regional suppliers for investment goods are often sidelined. CPI 2-2017

> read article

Perfect Forming Technology
Concrete – the all-rounder: wet-cast monolithic water chambers as spring tappings

In many corners of the world, a functional supply of clean drinking water is still anything but a given. So it is little wonder that cities and regions with particularly high quality tap water regularly rank highest in international comparative studies on quality of life. CPI 6-2016

> read article

Perfect Forming Technology
Fortier 2000 Ltée launches quality initiative on the Canadian civil engineering market with the production of wet-cast monolithic concrete manhole bases

A technology that is celebrating over 10 years of success in Europe, is now becoming increasingly popular in North America: monolithic concrete manhole bases made in only one pour with customised channel configurations are accepted state of the art when it comes to precision and component quality. CPI 5-2016

> read article

PRECISE
Trans-Canal Algeria relies on efficient concrete pipe manufacture with a high degree of automation

The Trans-Canal Centre concrete plant located in Algiers in North Africa relies on an efficient, flexible and primarily economic method of production by making extensive investment in its machinery. CPI 4-2016 

> read article

EXACT XL
Trans-Canal Algeria relies on efficient concrete pipe manufacture with a high degree of automation

The Trans-Canal Centre concrete plant located in Algiers in North Africa relies on an efficient, flexible and primarily economic method of production by making extensive investment in its machinery. CPI 4-2016

> read article

Perfect Forming Technology
Consistent corrosion protection at DN1000 – reinforced concrete pipes from Tamara Grafe Beton convince all along the line at sewer renewal in Hessen

The trend towards high quality and durable sewer systems shows no sign of slowing down in 2016. Aside from new infrastructure projects, this trend also applies for the renovation of existing installations in particular. CPI 3-2016

> read article

Perfect Forming Technology
Bilcon Industries sets new benchmarks in jacking of corrosion-resistant pipes in Singapore

The island state Singapore has developed rapidly into one of the most modern industrial nations in the world within just a few decades. Right now, more than 5.5 million inhabitants are living in the densely populated Singapore, the large majority in the same-named capital city. CPI 2-2016

> read article

Perfect Forming Technology
Monolithic up to DN1800 – Tracey Concrete enters a new dimension in the production of customised concrete manhole bases in UK and Ireland

Since more than 10 years the Perfect manufacturing system conforms to the latest accepted state of the art to produce custom-made wetcast monolithic concrete manhole bases. CPI 1-2016 

> read article

Perfect Forming Technology
Concrete pipe with HDPE lining and plug connection instead of weld is internationally successful on construction sites

The Perfect Pipe system invented by Schlüsselbauer Technology has now developed into an international success story. CPI 5-2015

> read article

Perfect Forming Technology
Matbet Beton is the next concrete plant in Poland to start the production of wet-cast, monolithic concrete manhole bases

The company Matbet Beton, which is based in Tarnowo PodgЧrne, only a few kilometres west of Poznań, is continuously working to support the improvement of the environmental situation and therefore also the living conditions of the people in Poland through its concrete technology solutions. CPI 4-2015 

> read article

PRECISE
SCG’s subsidiary invests in automated concrete pipe manufacture – a further milestone in the development of the renowned company group

PT. SCG Pipe and Precast Indonesia (SPPI) is a subsidiary of SCG, a leading ASEAN business conglomerate. With the vision to become a sustainable business leader in ASEAN, SCG has a long-term commitment to develop innovation to create high value added product and services. CPI 3-2015

> read article

Perfect Forming Technology
Principals, building contractors and manufacturers likewise benefit from high installation performance of prebed concrete pipe wet-cast in large scale production lines

Do we install sewerage pipe properly, or quickly? 'Both', is the genuine response of more and more concrete pipe manufacturers when asked by their customers or contractors. CPI 1-2015

> read article

Perfect Forming Technology
Diligent market analysis as basis for the decision to invest in manhole production technology

In autumn 2014, the Dutch firm of Fassaert Beton BV commissioned a plant for producing wet-cast manhole components. Besides manhole bases, the company also produces immaculate, high-quality manhole covers by wet-casting. CPI 6-2014

> read article

Perfect Forming Technology
Broader markets – further nominal widths: Concrete-plastic composite pipe system with connector now available up to DN1200

In 2014, the Perfect Pipe system, which has been used in civil engineering in Germany since 2013, was expanded with pipes in nominal width groups 2 and 3, according to DIN EN 1916 and DIN V 1201 standards. CPI 5-2014 

> read article

Perfect Forming Technology
Jacking pipes with HDPE lining manufactured by Grafe Beton, Germany

Since April 2014, Perfect Pipe has been manufactured by the family-run company Grafe Beton at its site in StЪlpchen, near Dresden. After production tests during the past year involving wet-cast concrete pipes of various nominal widths, Perfect Pipe – a concrete-plastic composite pipe – is currently made for use in a jacking project, with circular concrete pipes manufactured for trench construction. CPI 3-2014 

> read article

PRESSURE PIPE
Start of manufacture of PCCPs (Pre-stressed Concrete Cylinder Pipes) for long-term water supplies in the Gulf of Oman

Future-oriented water management is one of the most strategically significant economic issues in the Gulf state of Oman. It includes, on the one hand, the creation of infrastructure for overcoming a few concentrated intense rain events. CPI 1-2013

> read article

EXACT XL
Flexible production of large format concrete precast components for water resources management in the Gulf of Oman

Most recently, concrete precast components used for surface drainage, infrastructure construction and waste water draw-off are being produced in the Sultanate of Oman at an Exact XL production plant with especially flexible equipment supplied by the Austrian equipper Schlüsselbauer Technology. CPI 5-2013

> read article

MAGIC 2500
Starting 2012 with new one-man operation large manhole ring manufacture

The renowned precast component manufacturer Eurobeton which is located in the Czech city of Chvaletice has started the new year with a noteworthy boost to its production technology. CPI 2-2012

> read article

EXACT 1500
Americast Adopts Austrian Production Equipment to Rise Above Competition in the East Coast of the United States

More and more, American precasters are seeking a competitive edge by investing in the latest production technology in order to remedy serious labor shortages while significantly improving production rates. CPI 3-2011

> read article

MAGIC 1501
France: Bonna Sabla launches fully automated production system for manhole components

A minimum of personnel, consistently perfect product quality and an average of 25 risers in one hour was the challenge set for Schlüsselbauer by the French precast concrete manufacturer Bonna Sabla in the summer of 2010. CPI 5-2011

> read article

MAGIC 2500
Manhole production totally streamlined at Beton Bernrieder

The Beton Bernrieder family business in Rosenheim sees it as important to constantly gear its range and its in-house production programme to market requirements, to offer customers the very products and services actually required in construction. CPI 4-2010

> read article

MAGIC 1501
Austrian market leader starts up new production plant for manhole components

The Tiba Betonwerk GmbH is the result of a joint venture between the Austrian concrete plants Maba and Frühwald completed in 2006; a merger that created a full-service provider, specialized in the production of concrete components for civil engineering and environmental engineering. CPI 1-2010

> read article

Perfect Forming Technology
New large moulds used to successfully expand the concrete manhole range

Kaprin Sp.z o. o. was established in the autumn of 1989 and produces modern precast concrete parts. Along with sewerage system components, the company also produces precast concrete products for utility companies, road construction and special bespoke components. CPI 6-2010

> read article

Perfect Forming Technology
High performance mixing machine for new concrete manhole base production in Germany

Haba-Beton Johann Bartlechner KG headquartered in Garching, Bavaria has been synonymous with expertise and quality in civil engineering for nearly 100 years and is now a leader in the European pipe and manhole market. A new production plant for monolithic manhole bases was put into operation at the Teising site in Bavaria in 2005. CPI 6-2009

> read article

Perfect Forming Technology
Stradal-Group extends production of individual manhole bases to second French site

The name Stradal is not only synonymous in France with high-quality concrete products for civil engineering and garden and landscape design. To enhance the market position in the manhole components sector and build on it, 2008 saw the start of a Perfect production system for the production of custom-fit SVB manhole bases at the Fontenay sur Loing plant in the Loiret Département near the Paris region. CPI 2-2010


> read article

EXACT 1500
Complete production plant starts operation in Poland

In the summer of 2007 ZPB Kaczmarek put into operation a facility for the production of the complete range of manhole components in the Polish city Prusice which is close to Breslau. CPI 1-2008

> read article

RINGMASTER
Baltic States: High Quality Concrete Components for Civil Engineering

While the concrete component industry for civil engineering in Central Europe is stagnating or has already declined, the Baltic States have recently upgraded machines or invested in new and modern production plants for their concrete components. CPI 5-2008

> read article

EXACT 2500
One of Europes most advanced pipe production plants established in Ireland

Condron Concrete is a 100% Irish owned Private Company founded in 1969 by Mr. John Condron. It is located at Tullamore in the center of Ireland. The company manufactures concrete pipes, manholes and gulley traps as well as concrete roof tiles and accessories. In 2007, the company invested in a completely new pipe plant. BFT 1-2008

> read article

EXACT 2500
State-of-the-art manhole plant established in France at company Plattard in Villefranche

In the beginning of October the most modern manhole plant of France has been established at company Plattard in Villefranche and was celebrated with a big event with more than 1.000 visitors. CPI 6-2007

> read article

MAGIC 1501
Foley Products Company performs new tricks with Magic

The Foley Products Company Winder, Georgia production facility is located in the greater Atlanta, Georgia market and has successfully undertaken a giant step in becoming the most modern manhole components producer in North America. Foley decided to use Magic production technology for manhole production. BFT 3-2007

> read article

EXACT 2500
New benchmarks for the production of precast concrete pipes in Canada - Exact concrete pipe production

A new production facility has been built in Ontario that sets a benchmark for the production of precast concrete pipe and associated products in North America. Situated on 45 acres in the City of Burlington, the 8,000 m2 plant of Ontario Concrete Products (OCP) is a masterpiece of Schlüsselbauer technology. BFT 8-2002

> read article